Roving Networks WIFLY GSX Uživatelská příručka stáhnout pdf (Strana 93)

RN-WIFLYCR-UG

www.rovingnetworks.com Version 1.2r 4/30/13 page 93

To enable these modes, use the set q sensor <mask> command.

EXAMPLE 4-20: SAMPLE ALL SENSOR INPUTS

4.9.2 Using the Built-In Sensor Power

The modules contain an on-board sensor power pin, which is controlled by the set q

sensor <mask> command. <mask> is a bit mask value that determines which sensor

pins to sample when sending data using the UDP broadcast packet or the HTTP auto-

sample function. See “set q sensor <mask>” on page 21 for more details.

Firmware versions 2.23 and higher support the set q power <value> command. This

command sets an 8-bit register with two 4 bit nibbles that automatically turns on the

sensor power. See “set q power <value>” on page 21 for more details on using this

command.

set q sensor 0xff // Sample all sensor inputs

Note: In versions of firmware prior to 2.23, this command is named set option

sensor.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 121 122

Žádné komentáře

Roving Networks WIFLY GSX Uživatelská příručka Strana 93